铡刀式分板机设备在运行过程中出现问题是正常的，对于工厂来说，延长设备的使用寿命是很重要的。设备的维护不仅是为了提高其使用寿命，也是为了保证其工作质量。随着市场的发展。现在SMT、铡刀式A组装，已经基本实现了自动化铡刀式分板机代替人工分板。
It is normal for the equipment of cutter type plate splitter to have problems in the process of operation. It is very important for the factory to extend the service life of the equipment. Equipment maintenance is not only to improve its service life, but also to ensure its work quality. With the development of the market. Now the SMT and cutter type a assembly have basically realized the automatic chopper type board dividing machine instead of manual dividing board.
铡刀式分板机一般主要用于铡刀式A加工厂。其目的是取代传统的手工折板，提高生产效率，保证产品质量。乍一看，人们会觉得铡刀式分板机操作很复杂，然而，在实际应用中，无论是哪种铡刀式分板机，其应用原理都不像我们想象的那么复杂。
The cutter type plate splitter is generally used in the cutter type a processing plant. Its purpose is to replace the traditional manual folding plate, improve production efficiency and ensure product quality. At first glance, people will feel that the operation of the cutter type plate splitter is very complicated. However, in practical application, no matter what kind of cutter type plate splitter is, its application principle is not as complex as we imagine.
铡刀式分板机使用注意事项如下：
Matters needing attention in the use of the cutter type plate splitter are as follows:
1、当然，铡刀式分板机在设计结构时，除了经销商、制造商对于安全的考虑之外，在实际操作过程中，工作人员在打开铡刀式分板机电源之前，应首先仔细检查上下切刀之间的间距。分配器使用期间，严禁将手放入机器。在机器运行的任何情况下，叶片周围的保护板都不应拆除，以免发生事故。此外，铡刀式分板机仅用作分板使用，不能用于其他目的。在整个使用过程中，必须做好静电防护，工作人员在工作前必须戴好防静电手环才能开始作业。
Of course, when designing the structure of the cutter type plate splitter, in addition to the safety considerations of dealers and manufacturers, in the actual operation process, the staff should first carefully check the distance between the upper and lower cutters before turning on the power supply of the chopper type plate splitter. Do not put your hands into the machine during the use of the distributor. In any case of machine operation, the protective plate around the blade should not be removed to avoid accidents. In addition, the cutter type plate splitter is only used for dividing board, and cannot be used for other purposes. In the whole use process, we must do a good job in electrostatic protection, staff must wear anti-static Bracelet before starting work.
２、在使用分板机时，工作人员必须将铡刀式板分割槽放在放在固定刀座，并将铡刀式分板机置于水平位置移动，在操作机器的时候不要穿着过于宽松的衣服，长头发必须扎起来，以免意外事件发生。
When using the splitter, the staff must put the cutter type plate cutting groove on the fixed knife base, and move the cutter type plate splitter at the horizontal position. Do not wear too loose clothes when operating the machine, and tie up long hair to avoid accidents.
3、当使用铡刀式分板机时，工作人员必须将电路板分割器槽放置在固定刀架上，并将电路板分割器移动到水平位置。操作机器时不要穿太宽松的衣服，长发必须扎起来，以免发生事故。
When using the chopper type board splitter, the staff must place the circuit board divider slot on the fixed knife rest, and move the circuit board divider to the horizontal position. Do not wear loose clothes when operating the machine. Long hair must be tied up to avoid accidents.
4、在铡刀式分板机停止工作期间，工作人员应注意维护工作，随时注意保护上下刀定位板和上下刀刃，清理机器的表面和内部碎屑，并随时检查机器螺丝的紧固情况。若是机器长时间不工作，还应拆下上下定位板，上下刀具应涂上油以保护它们，使用前可将其擦掉。此外，在使用铡刀式分板机之前，还需要检查电路是否损坏。
During the period when the cutter type plate splitter stops working, the staff should pay attention to the maintenance work, protect the upper and lower knife positioning plates and upper and lower blades at any time, clean up the surface and internal debris of the machine, and check the fastening of the machine screws at any time. If the machine does not work for a long time, the upper and lower positioning plates should also be removed. The upper and lower cutters should be coated with oil to protect them. They can be wiped off before use. In addition, before using the chopper type board splitter, it is necessary to check whether the circuit is damaged.
5、此外，
铡刀式分板机日常检修和维护必须在平时进行。操作之前要看刀片是否松动，以避免操作过程中出现事故。若是铡刀式分板机出现异常并需要检修，首先确保电源线与插座分离，然后才可进行操作，以避免引发触电危险。
In addition, the daily repair and maintenance of the cutter type plate splitter must be carried out at ordinary times. Before operation, check whether the blade is loose to avoid accidents during operation. If the chopper type board splitter is abnormal and needs to be overhauled, first ensure that the power line is separated from the socket, and then it can be operated to avoid the risk of electric shock.
上述所讲解的就是铡刀式分板机的优势与使用注意事项，希望看完能够对您有所帮助，如果您想要了解更多关于铡刀式分板机的相关信息，欢迎点击本公司网址进行浏览！
What is explained above is the advantages and precautions for the use of the cutter type plate splitter. I hope that it can help you after reading it. If you want to know more about the relevant information of the cutter type plate splitter, please click our website to browse!
